Tech ExplainedLinked Platform:GPU2026-11-02Read more7minutes

Air-Cooled vs. Liquid-Cooled Servers: Selection Criteria and Data Center Retrofit Checklist

Define the selection boundaries between air and liquid cooling based on single-unit power consumption, rack power density, data center infrastructure, and operational capabilities. Also, list key items to verify before retrofitting.

Bai Xin Hua Gong Technical TeamAuditTechnical Director, ZhangUpdated on2026-11-13

Key takeaways

  • Single-unit power consumption and rack power density are the primary criteria for assessment.
  • Liquid cooling's value lies in overcoming thermal bottlenecks in high-density racks.
  • Before renovation, assess power supply, load-bearing capacity, piping, and operational conditions.
  • For low-to-medium density scenarios, prioritize optimizing airflow rather than implementing liquid cooling directly.
Table of Contents
  1. What is the key variable that determines the cooling method?
  2. When should liquid cooling be evaluated first?
  3. What items need to be confirmed before a data center renovation?
  4. How to optimize for low-to-medium density scenarios?
  5. Conclusion

Summary:Air cooling suits low-to-moderate power density scenarios, while liquid cooling addresses thermal bottlenecks in high-density racks. The decision sequence should first evaluate rack power density, then assess data center power supply, floor loading capacity, and operational readiness—rather than selecting a technology path upfront.

What is the core variable that determines the cooling method?

Power density per rack determines cooling complexity. For racks under 10 kW, proper airflow design and hot/cold aisle containment typically suffice. As power density rises further, air cooling requires higher airflow rates and fan speeds, leading to increased noise, energy consumption, and localized hotspots. This is where liquid cooling becomes advantageous.

Comparison ItemsAir-cooledLiquid cooling
Applicable Power DensityLow-to-medium density cabinetsHigh-density racks and high-power accelerators
Data center renovationFocus on air ducts, air distribution, and cold/hot aisle optimization.Assess piping, interfaces, leak detection, and load-bearing capacity.
Energy PerformanceFan and air conditioning energy consumption rise significantly with increasing density.Lower cooling energy consumption per unit of computing power.
Operational RequirementsStandard maintenance is sufficient; troubleshooting is straightforward.Liquid cooling inspection and emergency response plan required.
Deployment cycleShortInvolves modifications and has a long lead time.

When should liquid cooling be evaluated first?

  • High per-unit power consumption results in power density exceeding the air-cooling comfort zone when multiple units are deployed in a single cabinet.
  • Persistent hot spots in the data center remain unresolved despite airflow adjustments.
  • Air conditioning and fan energy consumption continue to rise, driving up electricity costs.
  • Build a new data center with integrated planning for liquid cooling and power distribution during the design phase.

What items need to be verified before a data center renovation?

  • Verify that power capacity and distribution redundancy match the full-load power.
  • Does the floor load capacity support high-density racks and associated equipment?
  • Piping routing, interface standards, and leak detection solutions.
  • Coolant supply, water quality requirements, and replacement intervals.
  • Does the operations team have the capability to inspect and respond to emergencies in liquid cooling systems?

How do you optimize for low-to-medium density scenarios?

Most low-to-mid density scenarios do not require conversion to liquid cooling. Instead, improve thermal performance by enclosing hot/cold aisles, implementing precise airflow delivery, raising return air temperatures, and removing obstructions within racks. Use monitoring data to identify hotspot cabinets and adjust workload distribution as needed. These optimizations offer low investment and fast results, making them the preferred approach.

Conclusion

  1. Calculate rack power density first, then determine the cooling strategy.
  2. Prioritize duct and airflow optimization for low-to-medium density areas to reduce costs.
  3. Pre-evaluate data center upgrades and operational capabilities in high-density scenarios to prevent equipment from arriving unable to run at full capacity.

Frequently Asked Questions

The following addresses frequently asked questions during the selection process. For guidance tailored to your specific business needs, please contact our technical team.

Related Products

Bai Xin Hua Gong SVR-H648 4U 8-GPU AMD Server
AMD

Baixin Huagong SVR-H648 4U 8-GPU AMD Server

The Baisun HG SVR-H48 is a flagship 4U dual-socket AI server powered by the AMD EPYC™ 9004 processor. It features 24 DDR5 memory slots supporting ECC RDIMM with speeds up to 4800MT/s. Within its 4U chassis, it supports up to 8 full-height, full-length, double-width PCIe 5.0 GPU cards. The front panel offers expansion options for 8/12 8-inch drive bays or 8/16/24 2.5-inch hard drives, with optional U.2 NVMe SSDs and M.2 boot drives available.

Shenzhen Baixin Huagong SVR-H645A Hygon Dual-Socket 7380 Server
Hygon

Shenzhen Baixin Huagong SVR-H645A Hygon Dual-Socket 7380 Server

The Baixin HG SVR-H645A is a cost-effective 2U dual-socket server powered by the Hygon 7380 processor. It features 32 DDR4 memory slots with speeds up to 3200MHz, supporting RDIMM and LRDIMM modules, with a maximum capacity of 4TB. Within its 2U chassis, it supports up to 6 PCIe 4.0 slots. The front panel accommodates up to 12 3.5/2.5-inch drives, and an optional rear configuration adds 2 2.5-inch drive bays.

Bai Xin HuaGong SVR-T625A 4U Rack GPU Server
AMD

Bai Xin HuaGong SVR-T625A 4U Rack GPU Server

The Baixin Huagong SVR-T625A server features a modular design as a 4U rack-mounted AI computing solution. It is built on a dual-socket SP5 platform, supporting up to two AMD 9004 series processors with a maximum of 128 cores and 256 threads per system. Each processor has a TDP of up to 400W. The platform includes 24 DDR5 RDIMM memory slots, with single-socket CPU support for 12-channel memory architecture, capable of handling up to 4800MHz. The motherboard is equipped with 4 PCIe Gen4 x16 expansion slots.

Configure server settings based on business scenarios

Share your workload type, concurrency scale, and deployment environment. Our technical team will provide recommendations based on platform compatibility requirements.

Contact the technical team
Guangdong ICP Prep 2023095749 No. 2